合金电阻,赛普欢迎您！
联系我们
首页 联系我们 电话咨询 QQ咨询

Walsin电容

产品

PRODUCTS

品牌与产品

PRODUCTS Information

行业更新

Latest Information

联系我们

Contact Us

首页 > Walsin电容

Walsin提供完整的MLCC产品组合，以满足智能手机、网络设备、汽车电子等多种应用。Walsin MLCC系列如下所示，供您参考，或者只需从下面选择一种首选的搜索方法。


General Purpose Caps

0201 to 1812 Sizes
NP0, X5R, X7R, Y5V, X6S, X7S
0.1pF~220uF
6.3V~100V

Ultra-small Caps (01R5 series)

Ultra-small Series 01005 (0.4×0.2mm)
NP0, X7R, X5R
0.2pF~0.1uF
6.3V~50V

Big sizes Caps

1825 2220 22251825,2220,2225
NPO，X7R
10pF~10uF
25V~4000V

Middle to High Voltage Caps_(200V-4kV)

0402 to 1812 Sizes
NP0, X7R, Y5V
0.5pF~1uF
200V~4000V

Microwave Caps_(RF series)

Ultra High Q / Ultra Low ESR
01005 to 1111 Sizes
NPO
0.1pF~1000pF
6.3V~1500V

Microwave High_Reliability_(RH series)

High reliability Ultra High Q / Ultra Low ESR
0402 to 0805 Sizes
X8G
0.1pF~10pF
200V~250V

Microwave Narrow Tolerance_(UF series)

Hi-Accuracy (Narrow Tolerance) Ultra High Q / Ultra Low ESR
0402 Size
NPO
0.1pF~3pF
25V~50V

Automotive Hi-Q Caps Qualified to AEC-Q200_(RT series)

AEC-Q200 & Ultra High Q / Ultra Low ESR
0402 Size
NPO
0.1pF~56pF
25V~50V

High Q & Low ESR Caps_(HH series)

High Q / Low ESR
0201 to 0805 Sizes
NPO
0.1pF~3300pF
10V~630V

Automotive Caps Qualified to AEC-Q200 (MT series)

AEC-Q200
0201 to 1210
NPO, X7R
0.1pF~2.2uF
10V~1000V

Automotive Soft Termination Caps Qualified to AEC-Q200 (ST series)

AEC-Q200
Soft Termination Bending Spec 5mm
0603 to 0805
X7R
1000pF~0.1uF
10V ~ 50V

Automotive Caps Without AEC-Q200 Certification_(MG series)

High reliability/Automotive Capacitors Series
0201 to 1812 Sizes
NPO, X5R, X7R
0.1pF~47uF
6.3V~1000V

High Temperature Caps(HT series)

up to 150°C
0402 to 1210 Sizes
X8G, X8R
0.2pF~0.047μF
10V~100V

Safety Certificated Caps X1/Y2_(S2 series)

Safety Certified X1/Y2
1808 to 2220 Sizes
NP0, X7R
3pF~4700pF
Peak impulse: 5000~6000V

Safety Certificated Caps X2 (S3 series)

Safety Certified X2
1808 to 2220 Sizes
NP0, X7R
3pF~22nF
Peak impulse: 2500V

Soft Termination Capacitors_(SH series, Ag-poly)

Soft Termination Bending Spec (JIS standard) 5mm
0402 to 2225
NP0, X7R, X5R, Y5V
0.1pF~47uF
6.3V to 3000V

Soft Termination Capacitors_(SG series, Cu-poly)

Soft Termination Bending Spec (JIS standard) 5mm
0603 to 1206
X7R
100pF~1uF
6.3V to 2000V

Low Profile Caps_(TT series)

Low Profile
0402 to 1210 Sizes
X7R, X5R & Y5V
0.22μF~22μF
10V~100V

Feed Through (3-terminal) Caps_(FT series)

0805 Size
X7R
10nF~1uF
10V ~ 50V

Mega Cap type (M Series)

1210 to 2225
NPO, X7R
1000pF~47uF
50V~630V

Class I Temperature Compensation

  • Capacitance Range : 8pF to 820pF

  • Capacitance Tolerance : ±0.5pF(for 8~10pF), ±5%(for 10~820pF)

  • Operating Temperature Range : -25°C to +125°C

  • Rated Voltage : 50,100. 500,1000,2000,3000,6000 VDC

  • Q Factor@1MHz, 1±0.2Vrms, 25°C : C≥30 pF ……… ..Q≥1000, C < 30 pF. . . ……Q≥400+20*C

  • Insulation Resistance(IR)@25°C : 10,000 MΩ Minimum

  • Dielectric Strength : 50~500VDC: 3 times the rated WVDC; 1K,2K,3KVDC: 2 times the rated WVDC; 6KVDC: 1.5 times the rated WVDC.

  • Testing Parameters : 1MHz ±20%, 1.0Vrms±0.2Vrms

Class II HI-K

  • Capacitance Range : 100pF to 22000pF

  • Capacitance Tolerance : ±10%(for Y5P), ±20%(for ZSU), +80% -20%(for Z5U&Z5V&Y5V)

  • Operating Temperature Range : -25°C ~ +85°C (Y5P,Y5V) ; 10°C ~ +85°C (Z5U, Z5V)

  • Rated Voltage : 50,100, 500,1000,2000,3000VDC

  • Dissipation Factor(tan δ) : Y5P, Z5U tan δ ≤2.5%, Z5V, Y5V : tan δ ≤5.0%

  • Insulation Resistance(IR)@25°C : 10,000 MΩMinimum or 200 MΩμF whichever is smaller

  • Dielectric Strength : 50-500VDC: 2.5 times the rated WVDC, 1k, 2k, 3kVDC: 2 times the rated WVDC

  • Testing Parameters : 1KHz ±20%, 1.0Vrms±0.2Vrms

Class III SEMI-CONDUCTIVE

  • Capacitance Range : 100,000pF

  • Capacitance Tolerance : +80%-20%

  • Operating Temperature Range : -25°C ~ +85°C

  • Rated Voltage : 16,25 & 50 VDC

  • Dissipation Factor(tanδ) : Y5V 16V….. tan δ ≤7.5%, Y5V 25/50V….. tan δ ≤5.0%

  • Insulation Resistance(IR)@25°C : 16V ….. ..100MΩ Minimum or 10MΩμF 25/50V…1000MΩ Minimum or 20MΩμF

  • Dielectric Strength : 2 times the rated WVDC

  • Testing Parameters : 1KHz ±20%, 0.1Vrms Maximum

Low Disspation

  • Capacitance Range : 100pF to 4700pF

  • Capacitance Tolerance : ±10%

  • Operating Temperature Range : -25°C ~ +125°C

  • Rated Voltage : 1K, 2K, 3K VDC

  • Dissipation Factor(tan δ) : LR: tan δ≤0.2%

  • Insulation Resistance(IR)@25°C : 10000MΩ Minimum or 200MΩμF whichever is smaller (500VDC, 60sec)

  • Dielectric Strength : 2 times the rated WVDC

  • Testing Parameters : 1KHz ±20%, 1.0Vrms±0.2Vrms

Safety Certificated Caps X1/Y2_(AC series)

  • Capacitance Range : AH:10pF to 4700pF ; AC : 10pF to 10000pF ; AS: 100pF to 4700pF

  • Capacitance Tolerance : ±0.25pF, ±0. 5pF, ±5%, ±10%, ±20%

  • Operating Temperature Range : -40°C ~ +125°C

  • Temperature Coefficient(C Max) : -1000~+350ppml°C (SL). ±10%(Y5P), +30~80%(Y5V), +20~55% (Y5U)

  • Voltage Resistance :

  • AH Type: X1: 400Vac / Y1: 400Vac or 250Vac

  • AC Type: X1 : 400Vac or 440Vac / Y2 : 250VaC or 300Vac

  • AS Type: X1 : 760Vac / Y1 : 500Vac

  • Dissipation Factor(tan δ) : SL: 30pF & above: Q≥ 1000, Below 30pF: Q≥400+20xC

  • @20°C, 1MHz, 1±0.2Vrms

  • Y5P: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms

  • Y5U: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms

  • Y5V: tanδ=5.0% Max. @ 20°C, 1KHz, 1±0.2Vrms

  • Insulation Resistance : 10000MΩ @500VDC, 60sec

  • Dielectric Strength : 1500Vac for 60sec(AC TYPE)(For Lead Pitch=5.0mm)

  • 2600Vac for 60sec(AC TYPE)(For Lead Pitch=7.5&10mm)

  • 4000Vac for 60sec(AH,AS TYPE)(For Lead Pitch=10&12.5mm)

Safety Certificated Caps X1/Y1_(AH series)

  • Capacitance Range : AH:10pF to 4700pF ; AC : 10pF to 10000pF ; AS: 100pF to 4700pF

  • Capacitance Tolerance : ±0.25pF, ±0. 5pF, ±5%, ±10%, ±20%

  • Operating Temperature Range : -40°C ~ +125°C

  • Temperature Coefficient(C Max) : -1 000~+350ppml° C (SL). ±10%(Y5P),
+30~80%(Y5V), +20~55% (Y5U)

  • Voltage Resistance : AH Type: X1 : 400Vac / Y1 : 400Vac or 250Vac ;

  • AC Type: X1 : 400Vac or 440Vac / Y2 : 250VaC or 300Vac

  • AS Type: X1 : 760Vac / Y1 : 500Vac

  • Dissipation Factor(tan δ) : SL: 30pF & above: Q≥ 1000, Below 30pF: Q≥400+20xC

  • @20°C, 1MHz, 1±0.2Vrms

  • Y5P: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms

  • Y5U: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms

  • Y5V: tanδ=5.0% Max. @ 20°C, 1KHz, 1±0.2Vrms

  • Insulation Resistance : 10000MΩ @500VDC, 60sec

  • Dielectric Strength : 1500Vac for 60sec(AC TYPE)(For Lead Pitch=5.0mm)

  • 2600Vac for 60sec(AC TYPE)(For Lead Pitch=7.5&10mm)

  • 4000Vac for 60sec(AH,AS TYPE)(For Lead Pitch=10&12.5mm)

Safety Certificated Caps X1/Y1_(AS series) 500Vac

  • Capacitance Range : AH:10pF to 4700pF ; AC : 10pF to 10000pF ; AS: 100pF to 4700pF

  • Capacitance Tolerance : ±0.25pF, ±0. 5pF, ±5%, ±10%, ±20%

  • Operating Temperature Range : -40°C ~ +125°C

  • Temperature Coefficient(C Max) : -1 000~+350ppml° C (SL). ±10%(Y5P),
+30~80%(Y5V), +20~55% (Y5U)

  • Voltage Resistance : AH Type: X1 : 400Vac / Y1 : 400Vac or 250Vac ;

  • AC Type: X1 : 400Vac or 440Vac / Y2 : 250VaC or 300Vac

  • AS Type: X1 : 760Vac / Y1 : 500Vac

  • Dissipation Factor(tan δ) : SL: 30pF & above: Q≥ 1000, Below 30pF: Q≥400+20xC

  • @20°C, 1MHz, 1±0.2Vrms

  • Y5P: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms

  • Y5U: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms

  • Y5V: tanδ=5.0% Max. @ 20°C, 1KHz, 1±0.2Vrms

  • Insulation Resistance : 10000MΩ @500VDC, 60sec

  • Dielectric Strength : 1500Vac for 60sec(AC TYPE)(For Lead Pitch=5.0mm)

  • 2600Vac for 60sec(AC TYPE)(For Lead Pitch=7.5&10mm)

  • 4000Vac for 60sec(AH,AS TYPE)(For Lead Pitch=10&12.5mm)

MONO CAP RD20

  • Capacitance Range : 1.0pF to 22μF

  • Capacitance Tolerance : Within the specified tolerance.

  • Operating Temperature Range : NPO:-55~+125(NPO), -55~+125°C (X7R) , -25~+85°C(X7R)

  • Temperature Coefficient(ΔC Max) : 0±30(ppm/°C)(NPO), ± 15%(X7R), +30%~-80%(Y5V)

  • Rated Voltage : 50, 100, 200, 250, 500, 630, 1000, 2000, 3000 VDC

  • Insulation Resistance(IR)@25°C : NPO:10,000MΩ Min. or 500Ω*F Min

  • X7R、Y5V:10GΩ Min or R‧C ≥ 500Ω．F(Whichever is smaller)

  • Testing Parameters : NPO：>1000pF：1KHz±10% 1.0±0.2 Vrms
 ≤1000pF：1MHz±10% 1.0±0.2 Vrms

  • X7R、Y5V：C ≤10uF 1KHz±10% 1.0±0.2 Vrms C>10 uF 120Hz±20% 0.5±0.2 Vrms

MONO CAP RD30

  • Capacitance Range : 1.0pF to 22μF

  • Capacitance Tolerance : Within the specified tolerance.

  • Operating Temperature Range : NPO:-55~+125(NPO), -55~+125°C (X7R) , -25~+85°C(X7R)

  • Temperature Coefficient(ΔC Max) : 0±30(ppm/°C)(NPO), ± 15%(X7R), +30%~-80%(Y5V)

  • Rated Voltage : 50, 100, 200, 250, 500, 630, 1000, 2000, 3000 VDC

  • Insulation Resistance(IR)@25°C : NPO:10,000MΩ Min. or 500Ω*F Min
X7R、Y5V:10GΩ Min or R‧C ≥ 500Ω．F(Whichever is smaller)

  • Testing Parameters : NPO：>1000pF：1KHz±10% 1.0±0.2 Vrms
≤1000pF：1MHz±10% 1.0±0.2 Vrms

  • X7R、Y5V：C ≤10uF 1KHz±10% 1.0±0.2 Vrms C>10 uF 120Hz±20% 0.5±0.2 Vrms

links:

cache
打开客服菜单